| Onderdeel nummer | NE133QUB-N01 |
| Merk | BOE |
| Maat | 13.3 |
| Sollicitatie | 3D Printer |
| Oplossing | 38403×2160 |
| Samenstelling | CELL , Oxide TFT-L |
| Helderheid | |
| CR | - |
| Kleuren | Grayscale |
| achtergrondverlichting | No B/L |
| Interface | eDP |
| fabrikant | BOE |
| modelnaam | NE133QUB-N01 (BOE093B) |
| scherm grootte | 13.3 inch |
| schermtype: | CELL , Oxide TFT-LCD |
| aantal pixels | 3840(3)×2160 (UHD) 332PPI |
| regeling | LCR Vertical Stripe |
| actief gebied (mm) | 293.76 × 165.24 (H×V) |
| omtrek (mm) | 297.76 × 173.04 × 1.25 (H×V×D) |
| bezelgebied (mm) | - |
| behandeling | Antiglare (Haze 25%), Hard coating (3H) |
| luminantie | 0 cd/m² |
| contrast ratio | - |
| kijk hoek | 85/85/85/85 (Typ.)(CR≥10) |
| antwoord | 25 (Typ.)(Tr+Td) ms |
| goed zicht op | Symmetry |
| werk modus | ADS, Normally Black, Transmissive |
| glasdikte: | 0.50+0.50 mm |
| doorlaatbaarheid | - |
| kleuren diepte | Grayscale |
| massa- | 167g (Max.) |
| gebruikt voor | 3D Printer |
| vernieuwingsfrequentie | 60Hz |
| touch screen | Without |
| driver ic lijst | Built-in COG 6 source chips |
| signaaltype: | eDP (4 Lanes) , eDP1.3 , HBR2 (5.4G/lane) , 40 pins Connector |
| spanningsvoorziening | 3.3V (Typ.) |
| maximaal waarderingen | Storage Temp.: -20 ~ 60 °C Operating Temp.: 0 ~ 50 °C |
| B133HAT03.0 | AUO | 13.3 | 1920×1080 |
| CLAB133WB01 | CPT | 13.3 | 1366×768 |
| LC133LF1L02 | PANDA | 13.3 | 1920×1080 |
| LC133LF4L01 | PANDA | 13.3 | 1920×1080 |
| LP133X2 | LG Display | 13.3 | 1024×768 |
| LP133X7-S2C1 | LG Display | 13.3 | 1024×768 |
| N133HCE-GP2 | Innolux | 13.3 | 1920×1080 |
| NE133QDM-N60 | BOE | 13.3 | 2560×1600 |
| NE133QUB-N01 | BOE | 13.3 | 38403×2160 |
| NE133QUM-N42 | BOE | 13.3 | 3840×2160 |
| NE133QUB-N01 | BOE | 13.3 | 38403×2160 |
| RV059FBB-N80 | BOE | 5.9 | 1620×2560 |
| RV101FBB-N00 | BOE | 10.1 | 4920×2880 |
| TM089CFSP01 | TIANMA | 8.9 | 3840×2400 |